Transfers levels and measures height differences to a precision of 2mm. Displays results digitally and does the calculations for you. Unlike optical and laser levels it does not need line of sight, so can work around corners; in deep trenches; behind trees; from room to room or floor to floor and around obstacles. It can estimate infill volumes e.g. for screeding, hardcore or topsoil; can measure structural deflection; needs only one person to operate it; requires virtually no setup and can store up to 137 sequentially numbered readings which can be recalled later*. *software needed.

• True one-person operation
• No line of sight needed; works around corners and obstructions
• Does the calculations for you and displays results digitally
• Set datum point anywhere on your site, or pre-set the starting height
• Unlimited ranges vertically and horizontally. No increasing error with horizontal distance
• Precision of 2mm in Standard mode or 0.2mm in HP mode
• Memorizes 137 numbered measurements for later recall
• Calculates average depth for infill estimates e.g. screed, hardcore, topsoil
• Simple to use
• No set-up time; rapid pack-up
• Compact and lightweight to carry; no staff or tripod needed
• Check and, if needed, correct the calibration yourself
• Operates from -30^oC to +70^oC for up to one year on standard, 9v battery

Available from UK importers GroundsCare Products, Silchester Road, Tadley, Hampshire.

Tel: 0118 981 1313 www.groundscare-products.co.uk