Is Secondary Ventilation Pipe Work Still Necessary In High Rise Buildings?
As increasing amounts of people work and live in city centres than ever before, the lack of space available for residential developments means that high rise builds are becoming more widespread.
When installing drainage and ventilation pipework in high rise buildings, traditional design standards dictate that a secondary ventilation stack has to be used to overcome air pressure changes. This is to account for the positive and negative air fluctuations that can compromise water trap seals due to the unsteady flow of water through the pipe work. Incorrect air balance can result in blowback and siphoning of the water seal in the trap, which could pose a public health risk.
To maintain stability in a drainage system, it is necessary to alleviate this change in air pressure immediately. This response time is paramount for protecting water trap seals, with traditional secondary pipework system thought to be the only way to provide this function.
There are many factors to consider when installing secondary pipework systems, which continue to be the industry norm. For Instance, installing a secondary stack ventilation system requires more installation time and materials, and in turn takes up valuable floor space, a major factor when limited space is taken into consideration.
Rather than a secondary ventilation piping system, air regulatory and attenuator valves can be installed in high rise buildings drainage stacks to balance negative and positive air pressure fluctuations.
Products such as the Polypipe Terrain P.A.P.A and Pleura valves are a proven alternative to replacing traditional secondary vented drainage systems. The P.A.P.A (positive air pressure attenuation) valve is designed to react to and attenuate positive pressure transience within the drainage stack of high rise developments providing a perfect venting solution for any multi-storey building.
The Pleura valves are designed to allow air into the system when negative pressures are experienced. When these two valves are combined, the effects of positive pressure such as blown sink and WC traps and negative pressure siphoning traps are mitigated, thus removing the need for a traditional secondary vented pipework system.
There are other potential savings to be made through the removal of secondary vented drainage systems. As less vents are required there is also a reduced requirement for floor penetration to install fire collars, something a secondary vent system would always require.
The removal of a secondary vent also reduces the drainage system footprint, meaning there is greater flexibility in the design of internal drainage systems. This increased flexibility means that building designs, and room layout, are no longer dictated by strict pipework systems, providing numerous benefits to architects, interior designers and building owners who have more sellable space.
Secondary venting also proves to be a much less effective solution for very tall, or complicated, drainage systems as the time lag that occurs when communicating a change in ambient airflow in the pipework can result in an ill performing drainage system.
The PAPA and Pleura valves have been tested in buildings up to 39 stories high and have BBA and LABC approval, making them the best option for designers, architects and installers.
For more information visit www.polypipe.com